Circular silencer f355, 1000mm.

Circular silencer f355, 1000mm.

BGN283.15
krgl-shumozaglushitel-f355-1000m
0 Reviews
BGN283.15
Tax included

BGN235.96 tax excl.

Inquiry

Please enter a name.
Please enter a valid phone.
Please enter a valid e-mail.

By clicking the "Send an inquiry" button, you agree with ours Terms of Use.

Congratulations! Your inquiry has been accepted.

Your inquiry has been accepted. Our operator will contact you to discuss it.

Product Information

Silencers for round ventilation systems are components designed to reduce noise generated by air passing through ducts. They effectively minimize sounds caused by high air velocity and are used in systems requiring noise reduction, such as ventilation and air conditioning installations in commercial and residential buildings.

Construction and Materials:

Silencers are made of a galvanized steel housing, which ensures corrosion resistance, and internal insulation of 50 mm mineral wool. Mineral wool is non-combustible and provides excellent soundproofing properties, effectively reducing noise levels caused by airflow in the ducts.

Sizes and Models:

Silencers are available in standard duct diameters and lengths of 500 mm and 1000 mm, making them suitable for a wide range of ventilation installations. For diameters of Ø160 and larger, they can be manufactured with a double-turned edge for easier connection, with the option of adding a silicone gasket for better sealing.

Notes:

  • Not recommended for use in kitchen exhaust ventilation systems, as greasy vapors can accumulate on the mineral wool, leading to a loss of silencer efficiency.

  • The silencer does not eliminate noise from the fan motor operation but effectively reduces sounds caused by high air velocity in the ventilation system.
PropertyDetails
Product NameSilencer for Round Ventilation Systems
MaterialGalvanized steel, mineral wool
Connection DiameterØ355
Outer Diameter of HousingØ455
Insulation Thickness50 mm (internal insulation)
Length1000 mm
Production OptionsDouble-turned edge / Silicone gasket
ApplicationsVentilation and air conditioning systems

Sound Absorption Characteristics of the Silencer:

The sound absorption of the silencer varies depending on the noise frequency. This is important because different noise sources—active or passive (e.g., fans, ducts, etc.)—generate noise at different frequencies, and not all silencers are effective across all frequencies. To determine whether a silencer will be effective, the following factors should be considered:

  • Each silencer has specifications regarding noise absorption (in dB) at different frequencies. These are usually presented as a graph or table showing how its effectiveness varies with noise frequency.

  • The most common noise in ventilation and air conditioning systems occurs at lower frequencies (e.g., from 20 Hz to 200 Hz).

  • The size of the ducts, air velocity, and existing components (such as fans, dampers, etc.) also affect the silencer's efficiency. For example, if the duct is very narrow, the silencer may have a reduced effect as there is limited space for sound absorption.

Below is a table with approximate values for sound absorption (attenuation) at different frequencies.

Frequency (Hz)Attenuation (dB)
63 Hz (low)≈ 4 dB
125 Hz (low)≈ 5 dB
250 Hz (mid)≈ 7 dB
500 Hz (mid)≈ 13 dB
1000 Hz (high)≈ 22 dB
2000 Hz (high)≈ 10 dB
4000 Hz (high)≈ 3 dB
8000 Hz (high)≈ 5 dB
Diameter
F355
No reviews

16 other products in the same category:

0894 388 577
Product added to wishlist
Product added to compare.

Our website uses cookies. When you click "I Accept", you agree to take advantage of ALL cookies.